Cisco路由器同时支持回拨功能，我们将路由器Router1作为Callback Server,Router2作为Callback Client。
与回拨相关命令:
任务 命令
映射协议地址和电话号码，
并在接口上使用在全局模式下
定义的PPP回拨的映射类别。 dialer map protocol address name hostname class classname dial-string
设置接口支持PPP回拨 ppp callback accept
在全局模式下为PPP回拨设置映射类别 map-class dialer classname
通过查找注册在dialer map里的主机名来决定回拨. dialer callback-server [username]
设置接口要求PPP回拨 ppp callback request
设置如下：
Router1:
hostname router1
user router2 password cisco
!
isdn switch-type basic-net3
!
interface bri 0
ip address 192.200.10.1 255.255.255.0
encapsulation ppp
dialer map ip 192.200.10.2 name router2 class s3 572
dialer load-threshold 80
ppp callback accept
ppp multilink
dialer-group 1
ppp authentication chap
！
map-class dialer s3
dialer callback-server username
dialer-list 1 protocol ip permit
!
Router2:
hostname router2
user router1 password cisco
!
isdn switch-type basic-net3
!
interface bri 0
ip address 192.200.10.2 255.255.255.0
encapsulation ppp
dialer map ip 192.200.10.1 name router1 571
dialer load-threshold 80
ppp callback request
ppp multilink
dialer-group 1
ppp authentication chap
！
dialer-list 1 protocol ip permit
!
相关调试命令：
debug dialer
debug isdn event
debug isdn q921
debug isdn q931
debug ppp authentication
debug ppp error
debug ppp negotiation
debug ppp packet
show dialer
show isdn status
举例:执行debug dialer命令观察router2呼叫router1,router1回拨router2的过程.
router1#debug dialer
router2#ping 192.200.10.1
router1#
00:03:50: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
00:03:50: BRI0:1PP callback Callback server starting to router2 572
00:03:50: BRI0:1: disconnecting call
00:03:50: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
00:03:50: BRI0:1: disconnecting call
00:03:50: BRI0:1: disconnecting call
00:03:51: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:03:52: callback to router2 already started
00:03:52: BRI0:2: disconnecting call
00:03:52: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
00:03:52: BRI0:2: disconnecting call
00:03:52: BRI0:2: disconnecting call
00:04:05: : Callback timer expired
00:04:05: BRI0:beginning callback to router2 572
00:04:05: BRI0: Attempting to dial 572
00:04:05: Freeing callback to router2 572
00:04:05: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
00:04:05: BRI0:1: No callback negotiated
00:04:05: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:04:05: dialer Protocol up for Vi1
00:04:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state
to up
00:04:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, chang
ed state to up
00:04:11: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 572
#router1
4. ISDN访问首都在线263网实例:
本地局部网地址为10.0.0.0/24,属于保留地址，通过NAT地址翻译功能，局域网用户可以通过ISDN上263网访问Internet。263的ISDN电话号码为2633，用户为263，口令为263，所涉及的命令如下表：
任务 命令
指定接口通过PPP/IPCP地址
协商获得IP地址 ip address negotiated
指定内部和外部端口 ip nat {inside | outside}
使用ppp/pap作认证 ppp authentication pap callin
指定接口属于拨号组1 dialer-group 1
定义拨号组1允许所有IP协议 dialer-list 1 protocol ip permit
设定拨号，号码为2633 dialer string 2633
设定登录263的用户名和口令 ppp pap sent-username 263 password 263
设定默认路由 ip route 0.0.0.0 0.0.0.0 bri 0
设定符合访问列表2的所有
源地址被翻译为bri 0所拥有的地址
ip nat inside source list 2 interface bri 0 overload
设定访问列表2，允许所有协议 access-list 2 permit any
更多内容请看PCdog.com--Cisco IOS技术手册 Cisco交换机 cisco路由器配置专题
