4）. 帧中继 Multipoint 配置实例:
Router1:
interface serial 0
encapsulation frame-reply
!
interface serial 0.1 multipoint
ip address 172.16.1.2 255.255.255.0
frame-reply map ip 172.16.1.1 201 broadcast
frame-reply map ip 172.16.1.3 301 broadcast
frame-reply map ip 172.16.1.4 401 broadcast
!
Router2:
interface serial 0
encapsulation frame-reply
!
interface serial 0.1 multipoint
ip address 172.16.1.1 255.255.255.0
frame-reply map ip 172.16.1.2 102 broadcast
frame-reply map ip 172.16.1.3 102 broadcast
frame-reply map ip 172.16.1.4 102 broadcast
!
五、ISDN
1. 综合数字业务网（ISDN）
综合数字业务网（ISDN）由数字电话和数据传输服务两部分组成，一般由电话局提供这种服务。ISDN的基本速率接口（BRI）服务提供2个B信道和1个D信道（2B+D）。BRI的B信道速率为64Kbps,用于传输用户数据。D信道的速率为16Kbps，主要传输控制信号。在北美和日本，ISDN的主速率接口（PRI）提供23个B信道和1个D信道，总速率可达1.544Mbps，其中D信道速率为64Kbps。而在欧洲、澳大利亚等国家，ISDN的PRI提供30个B信道和1个64Kbps D信道，总速率可达2.048Mbps。我国电话局所提供ISDN PRI为30B+D。
2. 基本命令
任务 命令
设置ISDN交换类型 isdn switch-type switch-type1
接口设置 interface bri 0
设置PPP封装 encapsulation ppp
设置协议地址与电话号码的映射
dialer map protocol next-hop-address [name hostname] [broadcast] [dial-string]
启动PPP多连接 ppp multilink
设置启动另一个B通道的阈值 dialer load-threshold load
显示ISDN有关信息 show isdn {active | history | memory | services | status [dsl | interface-type number] | timers}
注：
1.交换机类型如下表,国内交换机一般为basic-net3。
按区域分关键字 交换机类型
Australia
basic-ts013 Australian TS013 switches
Europe
basic-1tr6 German 1TR6 ISDN switches
basic-nwnet3 Norway NET3 switches (phase 1)
basic-net3 NET3 ISDN switches (UK, Denmark, and other nations); covers the Euro-ISDN E-DSS1 signalling system
primary-net5 NET5 switches (UK and Europe)
vn2 French VN2 ISDN switches
vn3 French VN3 ISDN switches
Japan
ntt Japanese NTT ISDN switches
primary-ntt Japanese ISDN PRI switches
North America
basic-5ess AT&T basic rate switches
basic-dms100 NT DMS-100 basic rate switches
basic-ni1 National ISDN-1 switches
primary-4ess AT&T 4ESS switch type for the U.S. (ISDN PRI only)
primary-5ess AT&T 5ESS switch type for the U.S. (ISDN PRI only)
primary-dms100 NT DMS-100 switch type for the U.S. (ISDN PRI only)
New Zealand
basic-nznet3 New Zealand Net3 switches
3. ISDN实现DDR（dial-on-demand routing）实例:
设置如下：
Router1:
hostname router1
user router2 password cisco
!
isdn switch-type basic-net3
!
interface bri 0
ip address 192.200.10.1 255.255.255.0
encapsulation ppp
dialer map ip 192.200.10.2 name router2 572
dialer load-threshold 80
ppp multilink
dialer-group 1
ppp authentication chap
！
dialer-list 1 protocol ip permit
!
Router2:
hostname router2
user router1 password cisco
!
isdn switch-type basic-net3
!
interface bri 0
ip address 192.200.10.2 255.255.255.0
encapsulation ppp
dialer map ip 192.200.10.1 name router1 571
dialer load-threshold 80
ppp multilink
dialer-group 1
ppp authentication chap
！
dialer-list 1 protocol ip permit
!
更多内容请看PCdog.com--Cisco IOS技术手册 Cisco交换机 cisco路由器配置专题
